ACCESS CONTROL PEDESTRIAN VEHICLES

AT-8
AT-8 high speed vehicle access control readers with long range detection The AT-8 control unit is designed for identifying vehicles by reading TAGs active at 2.45 GHz, fitted by suction cup on the vehicle windscreen. Double identification facility - vehicle and driver

CAR
CAR series vehicle access control readers. The CAR series control units are designed for vehicle systems, including outdoor installations

CAR - TAG
CAR/TAG vehicle access control reader with long range detection. The CAR/TAG control reader is designed for vehicle accesses requiring long range detection. Thanks to an active transponder, it reads while the user sits in the car.

COBRA
The COBRA management unit combined with WINCONTROL software makes it possible to create access control systems of all types and sizes; at the very top end over 500 readers can be connected to ?WIN-NET?. All reading technologies can be applied by the MAG magnetic reader, right up to the LONG RANGE AT-8 active transponder. Memory capacity of up to 65,000 users. Management of 999 time bands on weekly basis and of annual calendar including holidays.

DECODER TTR
The DECODER TTL interface makes it possible to create access control systems using the FAAC 433 SLH radio control. The system is highly recommended for outdoor vehicle set-ups too since the user can remotely open the access while comfortably seated in the car.

DIGIMAG / DIGITAG
DIGIMAG/DIGITAG pedestrian access control readers. The DIGIMAG and DIGITAG readers, supplied with keyboards and displays, are particularly suitable for pedestrian control with presence detection.

FRUTTO
Magnetic and proximity reader. These devices are composed by magnetic and proximity reader using the standard 503 box. They are suitable for any civil constructions as houses, offices, hotels, schools, etc.

MAG / MAG 100 / TAG 10
The MAG/MAG100 insertion magnetic card reader, makes it possible to create access control systems for both vehicles and pedestrians.

MIXER
With the MIXER card, you can combine two readers on the same entry point, even if made with different technology

TAG 5 / TAG 3
TAG-10/TAG-5/TAG-3 proximity readers for passive transponders make it possible to create access control systems with an extremely high security level. They are easier to use thanks to long range detection and as they have absolutely no moving mechanical parts, they require virtually no maintenance.

PC - Software
Personal Computer and management software HP Vectra 366 MHz or higher - RAM 32 MB or higher ? 4.3 GB Hard Disk or higher 15? monitor WINCONTROL 1P management software for direct connection to RS 232 serial port of PC and a COBRA unit

RESIST
Reader for pedestrian and vehicular gates. Resist range of readers and keyboards, has been conceived for both, pedestrian and vehicular gates. Metallic casing case structure with stainless steel front panel covered by polycarbonate layer.

VIPER 400
The VIPER 400 independent management card is designed for stand-alone mode (without personal computer) access control systems. It is the ideal solution wherever a simple, secure system is required.